8. Main gear shift lever and range
gear shift lever [Manual
transmission type only]
You can
shift the main-gear-shift and the range-gear-
shift only when the tractor is completely stopped and
clutch pedal is depressed.
(1) Main gear shift lever
(2) Range gear shift lever
(3) Clutch pedal
(A) Neutral position
(B) High
(C) Low
IMPORTANT :
• To change
speeds, press the clutch pedal
completely down and stop the tractor before
proceeding with speed change.
9. Clutch pedal [Manual
transmission type only]
WARNING
To avoid personal injury or death:
• The
sudden release of the clutch may cause the
tractor to lunge in an unexpected manner.
The clutch is disengaged when the clutch pedal is fully
pressed down.
(1) Clutch pedal
IMPORTANT :
To help prevent premature clutch wear:
• Disengage
the clutch pedal quickly and engage
it slowly.
• Avoid operating the tractor with your foot
resting on the clutch pedal.
• Select proper gear and engine speed depending
on the type of job.
10. Foot throttle [Manual
transmission type only]
Use the foot throttle when traveling on the road.
Press down on
the foot throttle for higher speed. The
foot throttle is interlocked with the hand-throttle-lever.
When using the foot throttle, keep the hand-throttle-
lever in the low idling position.
(1) Hand throttle lever
(2) Foot throttle
(A) Increase
(B)
Decrease
11. Synchro-shuttle shift lever
[Manual transmission type only]
Shift the synchro-shuttle shift lever forward to obtain
forward
speeds
and
shift back to obtain reverse
speeds.
When changing the synchro-shuttle shift lever, depress
the clutch pedal and stop the tractor before shifting.
FOOT CONTROLS AND HAND CONTROLS
INSTRUMENT PANEL AND CONTROLS
To Next Page
Loading...
Need help?
General
