Kubota LA434 - Page 38

28 REMOVING THE LOADER
1AGAECDAP009K\
(1) Hydraulic control lever
11. Stop the engine.
12. Slowly release all hydraulic pressure by moving the
hydraulic control lever in all directions.
13. Disconnect the 4 hoses with quick couplers at the
control valve.
NOTE:
Make sure:
• The hoses are out of contact with the front wheel.
• Dirt does not come in contact with the couplers,
and there is no oil leakage.
14. Place the protective caps and plugs on the quick
coupler ends.
LJ
1AGAECDAP020B
(1) Protective caps
15. Start the engine and slowly back the tractor away from
the loader.