111PERIODIC SERVICE
BChecking Wheel Bolt Torque
To avoid personal injury:
A Never operate tractor with a loose rim, wheel,
or axle.
A Any time bolts and nuts are loosened, retighten
to specified torque.
A Check all bolts and nuts frequently and keep
them tight.
Check wheel bolts and nuts regularly especially when
new. If they are loose, tighten them as follows.
BChecking Tie-rod Dust Cover
1. Check to see that dust covers are not damaged.
2. If dust covers are damaged, consult local KUBOTA
Dealer for this service.
A If dust covers are cracked, water and dust invade into
tie-rod and it will be early wear.
EVERY 100 HOURS
BLubricating Grease Fittings
Apply a small amount of multipurpose grease to the
following points every 100 hours:
If you operated the machine in extremely wet and muddy
conditions, lubricate grease fittings more often.
N-m (kgf-m)
(1)(2)(3)(4)
260 to 304
(26.5 to 31.0)
Cast iron disk
305 to 325
(31.1 to 33.2)
343 to 401
(35.0 to 41.0)
(1) Dust cover
(1) Grease fitting (Front axle support)
To Next Page
Loading...
Need help?
General
