16
TECHNICAL DATA
NOTE:
l Above dimensions are based on the machine with rubber trucks and JPN bucket.
JPN = made in Japan
l Specifications subject to change without notice.
∗ With unloaded digging bucket.
∗ Firm compacted soil.
∗ Operators must exercise extra caution and follow instructions in the operator's manual.
∗ Worse condition or heavier attachment to the above will decrease climbing angle.
Model name
U17
Canopy
Water cooled 4 cycle diesel engine with 3 cylinder
KUBOTA D902
2300
1300 ~ 1400
9.1
2.6 (4.1)
1.4 (2.1)
58 (30)
65 (1.13)
58 (1.01)
5.0 (19)
39.0/48.8 X 10.2 (990/1240 X 260)
3.7
26
[0.26]
2702
(18.6)
[190]
7.32 (27.7)
3704 (1680)
898 (54.8)
KUBOTA EXCAVATOR
Type
Operating weight
(including operator's)
Type
Engine
Performance
Model name
Total displacement
cc (cu.in)
Rated speed
Unit swing speed
Travel
speed
Ground
pressure
(With operator)
Max. displacement
(Theoretical)
Max. pressure
Climbing angle
Dozer
Fuel tank capacity
Left
Boom swing angle
Pressure
connection
for
attachments
Right
Fast
Slow
SAE gross
SAE NET
Engine
power
Width X Height
12.0 (16.1)
11.3 (15.1)
lbs.(kg)
rpm
Low idle speed
rpm
rpm
mph (km/h)
mph (km/h)
kW(HP)
kW(HP)
psi
(kPa)
[kgf/cm
2
]
%(deg)
in.(mm)
deg (rad)
deg (rad)
US gal (L)/min
US gal (L)
psi
(MPa)
[kgf/cm
2
]
To Next Page
Loading...
Need help?
General
