Kubota ZD18 User Manual

5-S16
ZD18(F) · ZD21(F) · ZD28(F), WSM
ELECTRICAL SYSTEM
Rotor
1. Tap out the shaft (1) from the rotor (3).
(When reassembling)
• Take care the direction of the collar (4), the flat side should face
to the pulley (2) side.
W1024281
(3) Servicing
Bearing
1. Check the bearing for smooth rotation.
2. If it does not rotate smoothly, replace it.
W1024489
(1) Shaft
(2) Pulley
(3) Rotor
(4) Collar
(5) Bearings
(6) Collar
KiSC issued 04, 2009 A

Kubota ZD18 Specifications

General

Horsepower	18 hp
Transmission	Hydrostatic
Cutting Width	48 inches
Drive	2WD
Engine Type	Diesel
Cutting Height Range	4 inches