Proper Riding Method
65
Proper Riding Method
Starting the Engine
• Lift up Main Stand before starting the engine.
• Check oil and gasoline content before starting the
engine.
Engine Stop Switch
: Engine will stop and cannot be started when setting
switch to this position. Re-start of engine is only
possible after setting the switch to position.
: The Engine can be started when setting the switch to
this position.
• The Main Power is cut off when the Engine Stop Switch is
set to the
position, therefore pulling the Brake Lever
and pushing the Start Button will not activate the motor.
• The Engine Stop Switch is meant for a temporary engine
stop only.
1. Confirm that the KEYLESS car key is within sensing
range.
2. Press the main switch button to turn power ON.
3. Make sure the throttle grip is fully closed.
4. Confirm that the engine stall switch has been switched to
" ".
To Next Page
Loading...
Need help?
General