29
9. EASY MAINTENANCE
(1) AIR CLEANER INSPECTION AND AIR
CLEANER CLEANING & REPLACEMENT
X Take out the air cleaner and visually check if it is dirty or
clogged.
1.Remove the screws attaching the air cleaner cover and remove
the air cleaner cover.
2.Remove the air cleaner element.
3.The installation sequence is the reverse of removal.
X Clean the air cleaner element with compressed air.
X Replace the air cleaner element at very 3000km.
X The air cleaner requires more frequent cleaning or replacing
when ridden in unusually dusty areas. When replacing, refer to
P38 Periodic Inspection & Maintenance Schedule.
.
※ CAUTION:
X Never use oil or solvent to wash the wet type paper element.
X Be careful not to allow water to enter the air cleaner; otherwise,
it may result in hard starting.
X If the air cleaner is not installed properly, dust may be sucked
into the cylinder directly to reduce engine horsepower and affect
the service life of engine.
To Next Page
Loading...
Need help?
General
