(5) FUSE CHANGE
XTurn off the main switch and check if the fuse is burned
out.
XWhen the fuse is burned out, replace with a specified
fuse.
XCheck for the cause of breakdown before replacing.
XFuse Specification: 7Ax 2
※ CAUTION:
XBe careful not to excessively expand the fuse clip during
removal.
XAfter a new fuse is installed, check the fuse clip for
looseness which is the main cause of trouble.
XNever use fuse of unspecified capacity, it may cause wire
overheating and burning out.
XWhen replacing electric appliances (lights, instruments),
be sure to use the recommended genuine parts.
XWhen washing the motorcycle, avoid flushing it.
XIf the cause can not be found, contact our distributor or
service station for inspection.
32
To Next Page
Loading...
Need help?
General
