10.FINAL REDUCTION/
TRANSMISSION SYSTEM
10-2
SERVICE INFORMATION
GENERAL INSTRUCTIONS
• The transmission system can be serviced with the engine installed in the frame.
• When replacing the drive shaft, use a special tool to hold the bearing inner race for this operation.
SPECIFICATIONS
Specified Oil: GEAR OIL SAE 90#
Oil Capacity: At change : 0.11 liter (0.1 lmp qt, 0.12 US qt)
At disassembly : 0.12 liter (0.11 lmp qt, 0.13 US qt)
TORQUE VALUES
Transmission case cover bolt 27 N-m (2.7 kgf-m, 19 lbf-ft)
TROUBLESHOOTING
Engine starts but ATV won‘t move
• Damaged transmission
• Seized or burnt transmission
Oil leaks
• Oil too rich
• Worn or damaged oil seal
To Next Page
Loading...
Need help?
General
