2. FRAME COVERS/EXHAUST MUFFLER
2-4
Disconnect the front brake cables.
Disconnect the remote stop switch and front
brake stop switch leads.
Remove the two screws and speed limiter
cover.
Disconnect the throttle cable.
Remove the two bolts and handlebar cover
holder.
Remove the four bolts and upper handlebar
holders.
Remove the handlebar.
INSTALLATION
Reverse the “HANDLEBAR REMOVAL”
procedures (refer to the “STEERING
SYSTEM” section in the chapter 12).
Refer to the “BRAKE LEVER FREE
PLAY” section in the chapter 3 to adjust
brake lever free play.
*
Front Brake Cables
Remote Engine Stop
Switch Leads
Front Brake Stop
Switch Leads
Screws
Throttle Cable
Bolts
Bolts