KYMCO Mongoose 50-4T User Manual

4. LUBRICATION SYSTEM
4-12
Inner Roto
r
Screws
Dowel Pin
Measure the rotor end-to-pump body
clearance.
Service Limit: 0.12 mm (0.0048 in)
ASSEMBLY
Install the outer rotor, inner rotor and pump
shaft into the pump body.
Install the dowel pin.
Install the pump cover by aligning the hole
in the cover with the dowel pin.
Tighten the screw to secure the pump cover.
Make sure that the pump shaft rotates freely
without binding.
Insert the pump shaft by aligning the flat
on the shaft with the flat in the inner
rotor.
＊

KYMCO Mongoose 50-4T Specifications

General

Brand	KYMCO
Model	Mongoose 50-4T
Category	Offroad Vehicle
Language	English