- 23 -
TEERING HANDLEBAR
• Visually inspect the steering handlebar for damage.
andlebar up and down
k
NSTRUMENT LIGHTS INSPECTION
• Check the turn signal indicator lights and high beam
to maxi speed when the ignition switch
S
• Apply the front brake and move the h
to check for any abnormal noise.
• Move the steering handlebar up, down, left, and right to chec
for any loose parts.
• Check to make sure that the handlebar rotates freely.
• dition is found, take your scooter to your
If any abnormal con
authorized KYMCO dealer for inspection.
I
indicator light to ensure that they are operational.
• Check the speedometer to ensure that it is operational.
• al.
Check the fuel gauge to ensure that it is operation
• Check the low oil indicator light to ensure that it is
operational.
edle on the speedometer will go from
• The ne
zero
is turned on. All this is doing is checking
the working condition of the speedometer.
To Next Page
Loading...
Need help?
General
