- 51 -
ECTION
l
imit and then put on the
the screws.
ake failure and is very dangerous.
000km or
RUBBER COVER INSPECTION FOR WIRE
ABLE
• protected by the rubber cover outside the
onnector. Check the rubber cover frequently.
dir
(2)
BRAKE FLUID LEVEL INSP
AND REFILLING
• Add recommended brake fluid DOT 4 into the tank unti
the fluid level reaches the upper l
cover and tighten
• Do not mix brake fluid of different brands. This
may cause br
When refilling brake fluid, be sure to cover the
scooter to protect the surface from the brake fluid.
• Replace the brake fluid at every 10
every year.
AND C
The cable cores are
c
When washing the scooter, do not flush the rubber cover •
ectly or brush it. Use a wet rag to wipe off dirt and dust
(1) Rubber Cover
Check points