Maintenance And Lubrication
Cooling System Inspection
1. Remove the under-hood hook& pu bolts.
2. Check the coolant level in the coolant
reservoir when the engine is cold as the
coolant level will vary with engine
temperature.
The coolant level should be between the
maximum and minimum marks.
3. If the level is low, remove the coolant
reservoir cap, and then add coolant or
distilled water to raise it to the specified
level.
FULL
LOW
69
NOTE:
A permanent type of antifreeze is installed in the
cooling system when shipped.It is colored green
and contains ethylene glycol.It is mixed.It is mixed
at 50% with water and has a freezing point of
-35 °C(-31 °F)
Recommended Coolant Solution
Coolant Mixture Ratio:
Water 50%:Antifreeze 50%(1:1)