KYMCO UXV 700i User Manual

Maintenance And Lubrication
70
Wheel Removal
1.Elevate the wheel by placing a suitable
stand under the frame.
2.Remove the nuts from the wheel.
3.Remove the wheel assembly.
Wheel Installation
When reinstalling a wheel, tighten the wheel nuts in
a crisscross(rather than a circular)pattern.
Be sure the tapered a side of the wheel nuts(1)face
the wheel rim(2).
Wheel nut torque:
Front:61 N-m(6.1 kgf-m,44 lbf-ft)
Rear:61 N-m(6.1 kgf-m,44 lbf-ft)
Be sure the tapered side of the wheel nuts(1) face
the wheel rim(2).
(1)(2)
OK

KYMCO UXV 700i Specifications

General

Brand	KYMCO
Model	UXV 700i
Category	Offroad Vehicle
Language	English