EasyManuals Logo

KYMCO VISA R 110 User Manual

KYMCO VISA R 110
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
30
SECTION 4 - MAINTENANCE
Maintenance schedule
Perform the pre-ride inspection (see page 18) at each scheduled maintenance period. This interval should be judged by the
odometer reading.
Maintenance schedule legend (see page 31):
I: INSPECT AND CLEAN, ADJUST, LUBRICATE OR REPLACE IF NECESSARY
C: CLEAN R: REPLACE A: ADJUST I: INSPECTION
The maintenance schedule on the opposite page specifies the maintenance required to keep your VISA R 110 motorcycle in
peak operating condition. Maintenance work should be performed in accordance with KYMCO standards and specifications
by properly trained and equipped technicians. Your KYMCO dealer meets all of these requirements.
* Should be serviced by your KYMCO dealer, unless you have the proper tools, service data, and are technically qualified.
* * In the interest of safety, we recommend these items be serviced only by your KYMCO dealer.
KYMCO recommends that your KYMCO dealer road test your motorcycle after each periodic maintenance service is
completed.
Maintenance schedule notes (see page 31):
1. At higher odometer readings, repeat at the frequency interval established here.
2. Service more frequently if the motorcycle is ridden in unusually wet or dusty areas.
3. Service more frequently when riding in rain or at full throttle.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KYMCO VISA R 110 and is the answer not in the manual?

KYMCO VISA R 110 Specifications

General IconGeneral
Compression Ratio9.2:1
Starting SystemElectric & Kick
Fuel SystemCarburetor
Front SuspensionTelescopic Fork
Front BrakeDisc
Rear BrakeDrum
Bore x Stroke52.4 mm x 49.5 mm
Transmission4-Speed
Rear SuspensionDual shock absorbers

Related product manuals