32
SECTION 4 - MAINTENANCE
Engine oil
Engine oil recommendation
Use a premium, quality 4-stroke engine oil to ensure longer
service life of your motorcycle. Only use oils that have a SJ
rat
ing per the API service classification.
Engine oil capacity: 1.0 L
Engine oil viscosity: SAE 15W-40
If this viscosity is not available, select an alternative engine oil
according to the chart shown below.
Engine oil level inspection
Check the engine oil level each day before riding your
motorcycle
NOTE: Park your motorcycle on the main stand, on level
ground.
1. Start the engine and let it idle for a few minutes
2. Stop the engine and put the motorcycle on its center
stand on level ground
3. Unscrew the dipstick, remove it and wipe it with a clean
cloth
4. Reinsert the dipstick, slide it down until the threaded part
touches the engine case, but do not thread it into the
case.
5. Remove the dipstick and visually note the oil level on the
stick. The engine oil level should be above the "L" mark
but not higher than the "F" mark. Add or remove oil as
required.
6. Reinstall the dipstick. Check for oil leaks.
ENGINE
To Next Page
Loading...
Need help?
General
