- 31 -
(5) FUSE CHANGE
y Turn off the main switch and check if the fuse is
burned out.
y When the fuse is burned out, replace with a
specified fuse.
y Check for the cause of breakdown before
replacing.
y Fuse Specification: 7A
n CAUTION:
y The fuse box is opened by rotating its cover. Be
careful not to excessively pull the connecting
wires because it may cause broken metal contact
points and result in open circuit.
y After a new fuse is installed, check the wire
connector for looseness that is the main cause of
trouble.
y Never use fuse of unspecified capacity, it may
cause wire overheating and burning out.
y When replacing electric appliances (lights,
instruments), be sure to use the recommended
genuine parts.
y If the cause can not be found, contact our service
station for inspection.
yWhen washing the motorcycle, avoid flushing it.
Fuse
To Next Page
Loading...
Need help?
General
