3.7.3 Activating fonts using a PCL command
In the PCL emulation of Kyocera Mita devices, the fonts can also be selected using
the corresponding PCL command. The Escape character (ASCII character 27 in
decimal or 1B in hexadecimal is displayed here as [esc]. Please do not use the
individual characters in brackets, just the actual Escape character.
Barcode 3 of 9; 8.1 cpi; 12 point: [esc](0Y[esc](s0p8.1h12v0s0b0T
Barcode 3 of 9; 4.6 cpi; 12 point: [esc](0Y[esc](s0p4.6h12v0s0b0T
EAN/UPC 10 Mil; prop.; 12 point: [esc](8Y[esc](s1p12v0s0b0T
EAN/UPC 13 Mil; prop.; 12 point: [esc](8Y[esc](s1p12v0s3b0T
Letter Gothic; 17 cpi; 9.5 point: [esc](8U[esc](s0p16.66h9.5v0s0b0T
Letter Gothic; 12 cpi; 12 point: [esc](8U[esc](s0p12h12v0s0b0T
Letter Gothic; 10 cpi; 14 point: [esc](8U[esc](s0p10h14v0s0b0T
Line Draw; 10 cpi; 12 point: [esc](0B[esc](s0p10h12v0s0b0T
OCR-A; 10 cpi; 12 point: [esc](0O[esc](s0p10h12v0s0b104T
OCR-B; 10 cpi; 12 point: [esc](1O[esc](s0p10h12v0s0b110T
USPS ZIP; prop.; 12 point: [esc](15Y[esc](s1p12v0s0b0T
Note
Please note that the barcodes in this section do not have any 'inherent
intelligence' like the barcodes controlled using BARC. You have to integrate
into the barcode text all of the checksums, the start and stop symbols at the
right places with their proper values. Otherwise your barcode reader will not
be able to read the barcode properly.
108
To Next Page
Loading...
Need help?
General