Kyocera ECOSYS FS-C5350DN User Manual

2-76 Using the Operation Panel
Select Account (Department-specific settings)
This specifies the functions used for managing individual account IDs.
The options available in Select Account are as follows:
• Counter (Account-specific counter management [color + monochrome
total])
• Color Counter (Account-specific counter management [color])
• Restriction (Print restriction selection [color + monochrome total])
• Color Restrict (Print restriction selection [color])
• Maximum Output (Maximum print output setting [color + monochrome
total])
• Color Max.out (Maximum print output setting [color])
• Reset Counter (Counter reset)
1 Press Z while Job Accounting > is displayed.
2 Press U or V repeatedly until >Select Account> appears.
3 Press [OK]. A blinking question mark (?) appears.
4 Each time you press U or V, the next registered account ID in the
sequence appears.
5 Display the desired account ID and press [OK]. Press Z, the display
changes to the individual department setting screen.
Counter (Account-specific counter management [color +
monochrome total])
Displays the total number of pages printed for the currently selected
account.
IMPORTANT You can only view the counter. You cannot change it.
1 Set the account ID and then press U or V repeatedly until
>>Counter appears. (E.g.: 100)
The counter shows a number between 0000000 and 9999999.
2 Press [MENU]. The display returns to Ready.
Color Counter (Account-specific counter management [color])
Displays the total number of color pages printed for the currently selected
account.
IMPORTANT You can only view the counter. You cannot change it.
1 Set the account ID and then press U or V repeatedly until >>Color
Counter appears. (E.g.: 50)
The counter shows a number between 0000000 and 9999999.
2 Press [MENU]. The display returns to Ready.
>Select Account>
?00000000
>>Counter
0000100
>>Color Counter
0000050

Kyocera ECOSYS FS-C5350DN Specifications

General

Brand	Kyocera
Model	ECOSYS FS-C5350DN
Category	Printer
Language	English