Kyocera ECOSYS FS-C5350DN User Manual

2-20 Using the Operation Panel
Box Password (Box password input)
User access to a Custom Box can be restricted by specifying a password
for the box. The password is specified from the printer driver.
1 If you have set a password for the Custom Box, press Z while
>Select Box > is displayed. Box Password is displayed and the
blinking cursor (_) appears.
2 Press U or V to increase or decrease, respectively, the value at the
blinking cursor. Enter the specified password. Press Y or Z to move
the cursor left or right.
3 Press [OK] to set the password and proceed to the next step
Manipulating Data in the Custom Box.
IMPORTANT After you enter your password, the printer checks the
password. If you entered the password incorrectly,
Wrong Password
is displayed and the input screen reappears. Re-enter the password
correctly.
Manipulating Data in the Custom Box
The items you can manipulate in the Custom Box are as follows:
• Box number : Box name / Document number : Document name
(Selects the data)
• Print All Files (Prints all the data)
• Delete All Files (Deletes all the data)
• Print File List (Prints a document list)
IMPORTANT The menus Box number: Box name/Document
number: Document name
, Print All Files, and Delete All
Files
are displayed when more than one document.
Box number : Box name / Document number : Document name
(Selects the data)
Use this procedure to select a document and then print or delete the
selected document.
1 Press [OK] while >Select Box > and the box number and box
name are displayed.
The document number and document name are displayed beneath
the box number and box name with a blinking question mark (?) in
front of the document number. Select the document name from the
printer driver. (For example : 0001:Data 1)
2 Press U or V repeatedly until the desired document number and
document name is displayed.
3 Press [OK]. The screen for setting the number of copies appears.
Press U, V, Y or Z to enter the number of copies (e.g.: 10), or to
display Delete.
You can select a number between 001 and 999 as the number of
copies.
Box Password
_
>Select Box >
0001:Box 1
>>0001:Box 1
?0001:Data 1
>>0001:Data 1
Copies 010

Kyocera ECOSYS FS-C5350DN Specifications

General

Brand	Kyocera
Model	ECOSYS FS-C5350DN
Category	Printer
Language	English