Imaging
Color Adjustment
Color Adjustment lets you customize the two color spaces in the driver and
save up to three custom groups. Color space changes can be made to hue,
saturation, and lightness (HSL) or to color balance levels.
Note: If different custom settings are selected in Color Adjustment and
Color Optimizer (Advanced tab), the latest change takes precedence and is
applied to the print job.
In a client-server environment, settings made by a client are saved in the client
computer for future use.
Selecting Custom Color Adjustment
If a custom color setting has already been defined, you can select and apply it to
a print job.
1
In Imaging > Color mode, select Full color.
2
In the Adjustment list, select Custom 1, Custom 2, or Custom 3.
3
Click OK.
Adjusting HSL (Hue, Saturation, Lightness)
HSL controls adjust the full spectrum, brightness, contrast, and vividness of the
color.
1
In Imaging > Color mode, select Full color.
2
In the Adjustment list, select Edit.
3
In Adjustment Settings > Custom color adjustment, select Custom 1,
Custom 2, or Custom 3.
4
Select HSL (hue, saturation and lightness).
5
Under Select Preview image, click the icon to select one of three different
images. Different colors are emphasized in each of the photographs to aid in the
color adjustment process.
6
Adjust the distribution and balance of hues.
For coordinated hue adjustment, from the Modify list, select Master. Drag the
Hue slider to increase or decrease the value between -180 and +180.
For specific hue adjustment, from the Modify list, select Red, Yellow, Green,
Cyan, Blue, or Magenta. Drag the Hue slider to increase or decrease the value
between -10 and +10.
7
Drag each slider to adjust the Saturation, Lightness, and Contrast between -
10 and +10.
Printer Driver
6-9
To Next Page
Loading...
Need help?
General