Settings Pages
When a forwarding address is specified as a destination, a Sender Name or
Sender FAX No./Address is appended at forwarding. When None are
specified, these will not be appended.
• Page Separate
Specifies whether to split the fax into files as many as the number of pages.
Select On to split the fax. (This item has effect when the forwarding
destination is Email, SMB, or FTP.)
• Number of Destination
Displays the number of registered destinations displayed for the next item.
• Destination List
Displays a list of registered forwarding destinations. Faxes are forwarded to
all destinations displayed here. For how to add a destination, refer to Setting
Destinations on page 6-25.
Save to FAX Box
Saves received documents in a FAX Box.
• Name
Displays the condition name.
• Status
Displays whether the condition is currently used.
• Save to FAX Box
Specifies whether to save faxes in a FAX Box. Received documents will not
be stored in the FAX Box if the forwarding conditions do not match.
• Box Name
Specifies the FAX Box to be used. When the selection button is clicked, a list
of registered FAX Boxes appears. The FAX Box to be specified here must be
registered in advance. For how to add a FAX Box, refer to FAX Box on page
4-5.
6
After you have finished setting all items, click Submit.
7
The screen returns to the Detail/Edit page. After you have finished setting all
items, click Submit.
8
The Requirement List page appears. Check that the status of the condition you
have set is On. Repeat the above steps to set more conditions.
9
Finally, set the process for faxes that do not satisfy any of the conditions on the
Requirement List. Click Advanced of Not complying with the requirements.
10
The Requirement List - Advanced page appears. Set whether to execute
forwarding processes for faxes satisfying no conditions by setting the status to
On or Off. When this item is set to On, set the subsequent items. The procedure
is almost the same as the procedure for adding a condition. See steps 2 to 6 as
a reference.
11
After you have finished setting the items, click Submit.
This completes the settings for forwarding processes using a Requirement
List.
6-24 User Guide
To Next Page
Loading...
Need help?
General