8-36
Setup and Registration (System Menu) > System Menu
Security Settings
Ping
eSCL -
Protocol Setting Selects whether to receive scanned documents using eSCL.
*1
Value: Off, On
Available Network
(Wi-Fi Direct)
Set whether to enable this function for each network.
Value: Disable, Enable
This function is displayed when [Protocol Setting] is set to [On].
Available Network (Wi-Fi)
Available Network
(Wired Network)
eSCL over SSL -
Protocol Setting Selects whether to receive scanned documents using eSCL over SSL.
*1, *2
Value: Off, On
Available Network
(Wi-Fi Direct)
Set whether to enable this function for each network.
Value: Disable, Enable
This function is displayed when [Protocol Setting] is set to [On].
Available Network (Wi-Fi)
Available Network
(Wired Network)
*1 The setting will be changed after restarting the device or network.
*2 Set "SSL" to [On] in Security Settings.
Security Settings (page 8-36)
After changing the setting, restart the network or turn the machine OFF and then ON.
Item Description
SSL Select whether or not to use SSL.
Value: Off, On
IPP Security Select the IPP security level. This setup is available when SSL is [On].
Value: IPP/IPP over SSL, IPPoverSSL only
HTTP Security Select the HTTP security level. This setup is available when SSL is [On].
Value: HTTP/HTTPS, HTTPS Only
SMTP Security Select the communication protocol according to the type of security employed by the SMTP
server. This setup is available when SSL is [On].
Value: Off, SSL/TLS, STARTTLS
POP3 Security (User 1) Select the communication protocol according to the type of security employed by the POP3
server. This setup is available when POP3 is [On].
Value: Off, SSL/TLS, STARTTLS
POP3 Security (User 2)
POP3 Security (User 3)
Item Description
Ping Checks if communication with the destination by entering the host name or IP address of the
destination is possible.
Item Description