5-37
Operation on the Machine > Handling Destination
Choosing from the One Touch Key
1
In the basic screen for sending, select [One Touch Key].
2
Select the One Touch Keys where the destination is registered.
If the One Touch Keys for the desired destination is hidden on the touch panel, select [ ] or
[ ] to scroll and view next or previous One Touch Keys.
3
Select [OK].
Destinations can be changed later.
Checking and Editing Destinations
1
Display the screen.
1 Specify the destination.
2 Select [Check].
2
Check and edit the destination.
To add a new destination, select [].
To display details for the destinations, select [ ]. New E-mail addresses and PC folders can
be edited if they have been specified.
To delete the selected destination, select
[].
This procedure assumes that One Touch Keys have already been registered.
For more information on adding One Touch keys, refer to the following:
Adding a Destination on One Touch Key (One Touch Key) (page 3-26)
You can specify a One Touch Key by one touch number by selecting the [Quick No.
Search] key.
Confirmation Screen of Destinations (page 5-38)
Specifying Destination (page 5-33)
• When selecting [On] for Entry Check for New Destination, the confirmation screen
appears. Enter the same host name and path again, and select [OK].
Entry Check for New Dest. (page 8-21)
• When selecting [On] for Destination Check before Send, the confirmation screen appears
after pressing the [Start] key.
Dest. Check before Send (page 8-21)
Confirmation Screen of Destinations (page 5-38)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
