Kyocera ECOSYS P2040dn Service Manual

2RV/2RW/2RX/2RY/3RA-3
(1-1) Paper jam due to the cover-open detection ............................................................. 7-24
(1-2) Paper jam due to the wave or curl in the fuser section of the damp paper .............. 7-25
(1-3) Paper jam due to dog-ear, skew, crease. fusing failure, curl, etc............................. 7-25
(1-4) Paper jam due to the guide factor ............................................................................ 7-25
(1-5) Paper jam due to paper loading failure at the paper source .................................... 7-26
(1-6) Paper jam due to the inferior paper.......................................................................... 7-26
(1-7) Paper jam caused by conveying rollers and pulleys ................................................ 7-27
(1-8) Paper jam due to the sensor .................................................................................... 7-27
(1-9) Paper jam due to setting failure or detection failure ................................................. 7-28
(1-10) Paper jam due to the static electricity....................................................................... 7-28
(1-11) Paper jam due to paper storage environment (high humidity) ................................. 7-28
(2) Paper jam indication .......................................................................................................... 7-29
(2-1) LCD model ............................................................................................................... 7-29
(2-2) LED model................................................................................................................ 7-29
(3) Paper jam detection condition ........................................................................................... 7-30
(4) Jam Codes ........................................................................................................................ 7-32
7-3 Self diagnostic ........................................................................................................................ 7-68
(1) Self diagnostic function...................................................................................................... 7-68
(2) Self diagnostic codes......................................................................................................... 7-68
(2-1) Error codes list ......................................................................................................... 7-68
(2-2) Content of Self Diagnostic........................................................................................ 7-69
(3) System Error (Fxxxx) Outline ............................................................................................ 7-90
(3-1) System Error code list .............................................................................................. 7-90
(3-2) Content of System Error (Fxxxx) Outline.................................................................. 7-90
(4) System Error (Fxxxx) Outline ............................................................................................ 7-93
7-4 Print Errors ............................................................................................................................. 7-96
(1) The paper loading message appears ................................................................................ 7-97
(2) The paper direction is incorrect ......................................................................................... 7-98
(3) Paper is fed from the MP tray............................................................................................ 7-98
(4) Garbled characters ............................................................................................................ 7-99
(5) Data is output in monochrome........................................................................................... 7-99
(6) Paper is not fed from the MP tray.................................................................................... 7-100
(7) The same data is printed out endlessly ........................................................................... 7-100
(8) [Print Job Error] or [Printing Queue] is displayed on the PC screen
and [Printer Unavailable] on the printer properties. ......................................................... 7-100
(9) Printer Pending message is displayed but [Processing]
or [Memory] lamp turns on on the operation panel.......................................................... 7-101
(10) Output is unavailable in sleep mode due to the main unit startup failure ........................ 7-101
(11) [Processing] or [Memory] lamp turns on on the operation panel. ................................... 7-101
(12) Print stops and operation lock after printing several pages.
No error is displayed and if directing print, it is on hold. .................................................. 7-101
(13) Print out is not available from the network factor (1) ....................................................... 7-102
(14) Print out is not available from the network factor (2) ....................................................... 7-102
(15) Print out is not available from the network factor (3) ....................................................... 7-103
(16) Print out is not available from the network factor (4) ....................................................... 7-103
(17) Print out is not available from the network factor (5) ....................................................... 7-104
(18) Print out is not available from the network factor (6) ....................................................... 7-104
(19) Print out is not available from the network factor (7) ....................................................... 7-105
(20) Print out is not available from the printer driver setting factor (1) .................................... 7-106
(21) Print out is not available from the printer driver setting factor (2) .................................... 7-106
(22) Print out is not available from the printer driver setting factor (3) .................................... 7-106
(23) Print out is not available from the printer driver setting factor (4) .................................... 7-107

Kyocera ECOSYS P2040dn Specifications

General

Color	No
Duplex printing	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Duplex printing mode	Auto
Time to first page (black, normal)	6.4 s
Print speed (black, normal quality, A4/US Letter)	40 ppm
Duplex print speed (black, normal quality, A4/US Letter)	20 ppm
Printing colors	Black
Maximum duty cycle	50000 pages per month
Replacement cartridges	TK-1160 (7.200 pagina's)
Number of print cartridges	1
Page description languages	PCL 5e, PCL 6, PCL XL, XPS
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (off)	0.1 W
Power consumption (ready)	8 W
Power consumption (printing)	620 W
Power consumption (PowerSave)	0.8 W
Energy Star Typical Electricity Consumption (TEC)	1.6 kWh/week
Internal memory	256 MB
Processor frequency	800 MHz
Compatible memory cards	SD, SDHC
Sound pressure level (printing)	48.8 dB
Display	LCD
Certification	TÜV/GS, CE
Product color	Black, White
Market positioning	Home & office
Display number of lines	2 lines
Paper input type	Cassette, Paper tray
Total input capacity	250 sheets
Maximum input capacity	850 sheets
Maximum number of input trays	3
Multi-Purpose tray input capacity	100 sheets
Custom media width	70 - 216 mm
Maximum print size	216 x 356 mm
Custom media length	148 - 356 mm
Duplex media weight	60 - 163 g/m²
Non-ISO print media sizes	Legal (media size), Letter (media size)
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Multi-purpose tray media types	Plain paper
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 220 g/m²
Wi-Fi standards	Not supported
Cabling technology	10/100/1000Base-T(X)
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Mobile printing technologies	Apple AirPrint, Google Cloud Print, Kyocera Mobile Print, Mopria Print Service
Standard interfaces	Ethernet, USB 2.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Sustainability certificates	Blue Angel, ENERGY STAR
Package depth	516 mm
Package width	500 mm
Package height	400 mm
Package weight	18000 g
Cables included	AC
Included cartridge capacity (black)	3600 pages
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	393 mm
Width	375 mm
Height	272 mm
Weight	14000 g