3-15
Preparation before Use > Loading Paper
Specifying Paper Size and Media Type
The default paper size setting for cassette 1, for the multi purpose tray, for the optional paper feeder (cassettes 2 to 5)
and optional bulk feeder is "A4" or "Letter", and the default media type setting is "Plain".
To change the type of paper to be
used in cassettes, specify the paper size and media type setting.
Paper Size and Media Type for the Cassettes
Specify the paper size and media type
of paper to be used in cassettes.
Item Description
Media Type
*1
*1 To change to a media type other than "Plain".
Media Type Setting (page 8-9)
When a paper weight that cannot be loaded in the cassette is set for a media type, that media type does not appear.
Select the media type.
Values
Cassette 1: Plain, Preprinted, Bond
, Recycled, Rough, Letterhead, Color, Prepunched,
High Quality, CUSTOM 1 - 8
Cassette 2 to 5: Plain, Preprinted, Bond, Recycled, Rough, Letterhead, Color,
Prepunched, Envelope, High Quality, CUSTOM 1 - 8
Other Paper Size Available options are as follows:
Values
Cassette 1: Envelope DL, Envelope C5, Executive, Letter, Legal, A4, B5, A5, A5 (Landscape),
A6, B6, ISO B5, Custom, Oufuku Hagaki, Oficio II, 216 × 340 mm, 16K, Statement, Statement
(
Landscape)
*2
, Folio
Cassette 2 to 5: Envelope Monarch, Envelope
#10, Envelope DL, Envelope C5, Executive,
Letter, Legal, A4, B5, A5, B6, Envelope #9, Envelope #6, ISO B5, Custom, Oufuku Hagaki,
Oficio II, 216 × 340 mm, 16K, Statement, Folio, Youkei 2, Youkei 4
*2 Inch models only.
Custom PaperSize
*3
*3 Appears when [Custom] is selected in Other Paper Size.
Register the custom paper size to be
used in Cassettes 1 to 5.
Values
Cassette 1:
Metric
X: 105 to 216 mm (in 1
mm increments)
Y: 148 to 356 mm (in 1 mm increments)
Inch
X: 4.13 to 8.50" (in 0.01" increments)
Y: 5.83 to 14.02" (in 0.01
" increments)
Cassette 2 to 5:
Metric
X: 92 to 216 mm (in 1 mm increments)
Y: 162 to 356 mm (in 1
mm increments)
Inch
X: 3.62 to 8.50" (in 0.01" increments)
Y: 6.38 to 14.02" (in 0.01
" increments)
X=Width, Y=Length