EasyManuals Logo
Home>Kyocera>Printer>FS-C5350DN

Kyocera FS-C5350DN Advanced Operation Guide

Kyocera FS-C5350DN
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #131 background imageLoading...
Page #131 background image
Glossary-1
Glossary
Additional memory
An additional memory (optional) is used for increasing the memory
capacity of this machine. For DIMM that can be used in this machine,
contact your service technician.
AppleTalk
AppleTalk offers file sharing and printer sharing and it also enables you to
utilize application software that is on another computer on the same
AppleTalk network.
Custom Box
The Custom Box function stores print data for each individual user on the
printer and allows the user to print single or multiple copies of the stored
data later using the printer's operation panel.
Default Gateway
This indicates the device, such as a computer or router, that serves as the
entrance/exit (gateway) for accessing computers outside of the network
that you are on. When no specific gateway is designated for a destination
IP address, data is sent to the host that is designated as the Default
Gateway.
DHCP (Dynamic Host Configuration Protocol)
This is a protocol that automatically resolves the IP address, Subnet
Mask and Gateway address on a TCP/IP network. Use of DHCP
minimizes the load of network administration, especially on network
environments with a large number of client computers where it is not
specifically necessary to assign a separate IP address to each client,
including printers.
dpi (dots per inch)
This indicates the number of dots printed per inch (25.4 mm) as a unit for
expressing resolution.
EcoPrint
This is a printing mode that reduces toner consumption. Pages printed in
the EcoPrint mode are lighter than pages printed in the normal mode.
Emulation
This refers to emulation of other manufacturers’ printers. The printer
emulates operation of the following printers: PCL6 and KPDL.
Form Feed Timeout
While data is being sent to a printer, some pauses may occur. At this time,
the printer waits for the next data without making a page break. Form feed
timeout is a function to wait only a preset amount of time before it
executes an automatic page break. After the waiting period begins, once
the designated amount of time is exceeded, the printer will automatically

Table of Contents

Other manuals for Kyocera FS-C5350DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera FS-C5350DN and is the answer not in the manual?

Kyocera FS-C5350DN Specifications

General IconGeneral
ColorYes
Maximum resolution9600 x 600 DPI
Time to first page (black, normal)8.5 s
Time to first page (color, normal)10 s
Print speed (black, normal quality, A4/US Letter)30 ppm
Internal memory256 MB
Processor modelPowerPC 750CL
Maximum internal memory1280 MB
Sound power level (standby)36 dB
Sound pressure level (printing)55 dB
Total input capacity150 sheets
Total output capacity250 sheets
Maximum input capacity2150 sheets
Maximum print size210 x 297 mm
Non-ISO print media sizesLetter
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Maximum ISO A-series paper sizeA4
Multi-Purpose Tray media weight60 - 220 g/m²
SafetyGS, TÜV, CE
Power managementAC 220 - 240 V, 50/60 Hz
Custom media sizes70 x 138 mm - 216 x 356 mm
Networking features10/100BaseTX
Power consumption (active)516 W
Compatible operating systemsWindows, Mac OS X 10.2, UNIX, LINUX
Maximum duty cycle100000 pages per month
Power consumption (standby)74 W
Power consumption (PowerSave)8 W
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)345 x 518 x 480 mm

Related product manuals