Kyocera KM-4050 User Manual

Setup and Registration
6-24 OPERATION GUIDE
2
Press [FAX/i-FAX], [Next] of TX/RX Restriction, and then [Change] of TX
Restriction.
3
To not use the
sending restriction,
press [Off]. To
restrict the other
parties to which you
send originals only to
the ones registered
in Permit FAX No.
and Permit ID No. as
well as the ones
registered in the
Address Book, press
[Permit List + Address Book].
4
Press [OK].
5
To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
Setting Reception Restriction
You can restrict incoming faxes so that you only receive originals from
senders registered in Permit FAX No. and Permit ID No. and senders
registered in your Address Book. This mode also allows you to set a
[Reject List] for Reception Restriction so that reception from senders on
the list of Rejected FAX numbers or from senders whose Local FAX
Number is not registered are rejected. To change the reception restriction,
follow the steps below.
1
Press the System Menu key.
2
Press [FAX/i-FAX], [Next] of TX/RX Restriction, and then [Change] of RX
Restriction.
3
To not use the
reception restriction,
press [Off]. To
restrict the other
parties from which
you receive originals
only to the ones
registered in Permit
FAX No. and Permit
ID No. as well as the
ones registered in
the Address Book,
press [Permit List + Address Book]. To block incoming faxes from senders
registered in Reject FAX No., press [Reject List].
4
Press [OK].
Status
FAX - TX Restriction
Cancel OK
10/10/2007 10:00
Restrict the recipients to whom faxes can be sent.
Users will only be able to send faxes to
registered recipients.
Permit List
+ Addres s Book
Off
Status
FAX - RX Restriction
Cancel OK
10/10/2007 10:00
Restrict the recipients from whom faxes can be received.
[Permit List + Address Book]: Only accept faxes from
regis tered numbers .
[Reject List]: Reject faxes from numbered regis tered on
the Reject List.
Permit List
+ Addres s B ook
Off Reject List

Kyocera KM-4050 Specifications

General

Print technology	Laser
Time to first page (black, normal)	3.5 s
Print speed (black, normal quality, A4/US Letter)	40 ppm
Maximum copy resolution	600 x 600 DPI
Copy speed (black, normal quality, A4)	40 cpm
Faxing	Mono faxing
Fax memory	120 MB
Modem speed	33.6 Kbit/s
Fax coding methods	JBIG, MH, MMR (Fax coding method), MR
Multi-Purpose tray	Yes
Total input capacity	1000 sheets
Total output capacity	250 sheets
Maximum input capacity	4200 sheets
Multi-Purpose tray input capacity	200 sheets
Internal memory	512 MB
Processor model	750FL
Processor family	PowerPC
Sound power level (standby)	52 dB
Sound pressure level (printing)	69 dB
Font styles	80 outline fonts (PCL6), 136 PostScript KPDL 3 fonts, 1 bitmap font, 45 types of one-dimensional barcodes plus two-dimensional barcode (PDF-417)
Dimensions (WxDxH)	599 x 646 x 745 mm
Power requirements	AC 220 - 240 V, 50/60 Hz
All-in-one functions	Copy, Fax, Scan
Maximum internal memory	1 GB
Color all-in-one functions	scan, n
Power consumption (standby)	230 W
Power consumption (PowerSave)	17 W
Power consumption (average operating)	1010 W
Certification	TÜV/GS, CE, ISO 15408
Market positioning	Business