Kyocera KM-4050 User Manual

FAX Operation (Basic)
OPERATION GUIDE 3-3
3
2 Press [On.]
3 Press [OK].
NOTE: In direct transmission, you can designate only one destination for
one transmission.
Memory Transmission (When originals are placed in the document
processor)
After originals placed in the document processor are scanned and stored
in the memory, the receiving system is dialed. This method is very
convenient because you can have originals returned to you without waiting
for sending of the originals to be completed. It is suitable for sending
multiple-page sheet originals.
Memory Transmission (When originals are placed on the glass
surface)
This method is suitable for sending book originals that cannot be placed in
the document processor. After originals placed on the glass surface are
scanned and stored in the memory, the receiving system is dialed.
NOTE: When continuous scan is set, you can continue with scanning of
a next original after an original on the glass surface has been stored in
memory. Every time one page is scanned, you perform an operation to
allow continued scanning, and after all the originals have been stored in
memory, the receiving system is dialed.
Setting for Direct
transmission
Description
Off Starts memory transmission.
After originals are scanned into memory, the
communication starts.
On Starts direct transmission.
Dials the receiving system, and after the
communication has started, originals are
scanned.
Status
10/10/2007 10:00
Enter Destination.
Cancel OK
Add Shortc ut
Ready to directly transmit FAX.
OnOff
FAX Direct Transmission
Destination
Send FAX directly, without reading original
into memory. FAX can also be sent
page by page , wit h conf irm ation
af ter eac h page.
0
Press [OK] to display
the image.

Kyocera KM-4050 Specifications

General

Print technology	Laser
Time to first page (black, normal)	3.5 s
Print speed (black, normal quality, A4/US Letter)	40 ppm
Maximum copy resolution	600 x 600 DPI
Copy speed (black, normal quality, A4)	40 cpm
Faxing	Mono faxing
Fax memory	120 MB
Modem speed	33.6 Kbit/s
Fax coding methods	JBIG, MH, MMR (Fax coding method), MR
Multi-Purpose tray	Yes
Total input capacity	1000 sheets
Total output capacity	250 sheets
Maximum input capacity	4200 sheets
Multi-Purpose tray input capacity	200 sheets
Internal memory	512 MB
Processor model	750FL
Processor family	PowerPC
Sound power level (standby)	52 dB
Sound pressure level (printing)	69 dB
Font styles	80 outline fonts (PCL6), 136 PostScript KPDL 3 fonts, 1 bitmap font, 45 types of one-dimensional barcodes plus two-dimensional barcode (PDF-417)
Dimensions (WxDxH)	599 x 646 x 745 mm
Power requirements	AC 220 - 240 V, 50/60 Hz
All-in-one functions	Copy, Fax, Scan
Maximum internal memory	1 GB
Color all-in-one functions	scan, n
Power consumption (standby)	230 W
Power consumption (PowerSave)	17 W
Power consumption (average operating)	1010 W
Certification	TÜV/GS, CE, ISO 15408
Market positioning	Business