MTD 112 27 06/97
b) Shipping
The size of the package of an MTD 112 enclosure is:
H = 45 cm. (17.5")
W = 47 cm. (18.5")
D = 62 cm. (24.5")
The total shipping weight is: 26 kg(57 lb)
Warning: The package should not be exposed to water or moisture
c) Fittings
3 Aeroquip type fixing posts are provided for rigging; two being located symmetrically on the
top and the bottom of the MTD 112 cabinet, one being located at the back of the cabinet.
The Standard Aeroquip stud with locking pin for connecting to the fixing post is under our
reference PION 1.
Grille: the front grille is made of honeycomb perforated 1.5 mm. thick steel with epoxy
catalytic black finish. The drivers are further protected by a reticulated polyurethane foam
10 mm. thick glued in front of the grille.
The grille is fixed to the enclosure by 4 screws located just beneath the foam.
4 Fixing nuts are provided, 2 on each top/bottom side. They can be used either for
accessories fitting or for U. bracket mounting.
To Next Page
Loading...
Need help?
General
