MTD 112 28 06/97
d) CONSTRUCTION
The MTD 112 cabinets are constructed of 18 mm. (0.7") Baltic Birch plywood, rabbeted,
screwed and glued.
Internal steel bracing guarantees both flying security and long-term reliability of the cabinets
under the most demanding touring conditions.
The structured heavy duty paint provides excellent scratch resistance for a long-lasting
smooth appearance. The paint is also made available for maintenance.
The color is RAL 8019 maroon-gray.
The drivers are fixed to the cabinets with screws and "Big Head" type nuts, allowing
numerous mounting/dismounting operations without the nut dropping, like traditional "T"
nuts often do.
The screws are treated against corrosion.
5.2 THE MTD 112 LLCa LINE-LEVEL CONTROLLER
a) External description
b) Shipping
The size of the package of an MTD 112 LLCa unit is:
H = 8.5 cm. (3")
W = 53 cm. (21")
D = 44 cm. (17")
The total shipping weight is: 4.5 kg.(10 lb)
Warning: The package should not be exposed water or moisture
c) Unpacking
When unpacking the MTD 112 LLCa controller unit, take care of not tearing the plastic
sleeve which can be useful for eventual re-packing.
Do not drop the unit when unpacked.
A mains supply lead is provided outside of the plastic sleeve. It is provided with an Europa
type connector at one end and a French standard mains plug connector at the other end.
When using the unit with non-continental compatible mains standards, simply cut the plug
and replace.
To Next Page
Loading...
Need help?
General
