21
12 • CALOUT
Naboo can count the hours of operation for the steam generator and notify the operator when it is
necessary to run the limescale cleaning cycle on the steam generator using the special CALOUT
cycle.
PRIMARY WARNING MESSAGES
When the CALOUT process is needed, a
popup warning appears: “Perform CALOUT
by the end of the day”. Press “Start
CALOUT” (see next paragraph) to immediately
perform CALOUT or press “Ignore” to
perform the procedure later (example: at the
end of the day).
Pressing “Ignore” causes the popup to
disappear and a green icon to appear in the
upper left. Press the icon to make the popup
reappear (example: to perform CALOUT at the
end of the day).
Pressing “Ignore” causes the popup to
disappear and an orange icon to appear in the
upper left. Press the icon to make the popup
reappear (example: to perform CALOUT at the
end of the day).
If you do not perform CALOUT by the end
of the day, the next day the following popup
appears: “Boiler maintenance needed,
perform CALOUT as soon as possible.”
Press “Start CALOUT” (see next paragraph)
to immediately perform CALOUT or press
“Ignore” to perform the procedure later
(example: at the end of the day).
To Next Page
Loading...
Need help?
General