16
www.howdens.com
5 - Start the programme
Starting a programme Adding laundry during a programme
• Press the Start/Pause button .
The door locks and the programme starts.
If the Delay Timer has been selected, this counts down
on the time display. At the end of the Delay Timer or
immediately after the programme has started, the
programme duration appears on the time display.
Energy savings
If after 10 minutes you have not started the
programme, the Display will go into standby.
To reactivate the Display:
• Turn the Programme Selection knob or press any
button and the display lights will turn on.
• Press the Start/Pause button .
• Wait until the Door is unlocked.
• Open the door and add or take out laundry.
Laundry can be added or removed at any time,
provided that the Door Locked symbol
is not
illuminated on the control panel.
6 - End of programme
Open the door and removing the
laundry
At the end of the programme,
will be displayed.
• Wait until the
Door Locked symbol
goes out.
• Turn the Programme Selection knob to OFF
• Reach behind the door grip and pull the door open.
• Remove the laundry
Items left in the drum could discolour other items in
the next wash or become discoloured themselves.
– Remove all items from the drum.
CAUTION: Water, laundry may be very wet and hot.
• Check the door seal for any foreign objects.
Tip: Dry door glass and seal with a clean cloth.
• Close the door.
• Make changes in auxiliary functions, temperature
and speed settings as necessary.
• Press the Start/Pause button
.
The programme will continue.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
