Q u i c k S t a r t G u i d e
E D S 8 / 1 6 P S
QUICK CONNECT
Complete the following steps in order. Refer to the numbers in the
figure below.
1. Connect a serial device to your unit.
2. Connect an Ethernet cable to the RJ45 port.
3. Supply power to your unit using the power cord that was included in
the packaging.
4. Supply power to the serial device.
2
W W W . L A N T R O N I X . C O M
3
The EDS products allow serial devices to connect and communicate over an
Ethernet network. This Quick Start will step you through hardware installation
and initial configuration of your EDS8PS or EDS16PS.
WHAT'S IN THE BOX
In addition to the EDS8PS or EDS16PS, the box contains the following items:
PART # COMPONENT DESCRIPTION
500-041 Power cord
500-103 RJ45-DB9F Null Modem Cable
CD-EDSPS-XX CD-ROM containing the User Guide, software utilities,
and Quick Start Guide.
PINOUTS
RS-232 Pin Assignment
10/100 BASE-T
Ethernet
Serial Device
2
3
1
To Next Page
Loading...
Need help?
General