NetWare Configuration
5 - 5
5.3 Creating NDS Print Queues Using PCONSOLE
1. Log in as Admin on the Þle server you will be changing.
2. Type PCONSOLE at the X: prompt to start the utility.
For example, if your file server is mapped to the F: drive, you would use the F:
prompt.
3. From the main menu choose Quick Set-Up.
4. PCONSOLE will prompt you for information with which to conÞgure the print
queue.
The print server name is the name of your MPS (MPS_xxxxxx). The new printer
name is the service name (for example, MPS_xxxxxx_Text). The new print queue
can be any name. The print queue volume is the name of the file server from which
the printer receives print requests. The remaining fields can be left in their default
settings.
NOTE: In the above text, xxxxxx represents the last 6 digits of your MPSÕs
hardware address. The hardware address is printed on the unitÕs label.
5. Press the F10 key to save the print queue information.
6. Reboot the MPS.
To Next Page
Loading...
Need help?
General
