6
Quick Start Guide
MSS100 / MSS-VIA / MSS4
WWW.LANTRONIX.COM
7
IP ADDRESSING
Your unit must have a unique IP address on your network.
The systems administrator generally provides the IP address.The IP address
must be within a valid range, unique to your network, and in the same subnet
as your PC.You’ll need the following information before you set up the unit.
(See Assign IP.)
IP Address: ___ ___ ___ ___
Subnet Mask: ___ ___ ___ ___
CONNECT
1) Mount or place the MSS in a secured room.
2) Connect serial devices to the serial ports.
3) Connect your network to the MSS (via one of its Ethernet ports or
the PCMCIA slot, if applicable).
4) Connect the power supply to the MSS.
5) Wait about 30 seconds.
6) Confirm the following:
a) OK LED blinks green
b) Link LED glows green
7) If the MSS is connected to the network via the PC card slot or Ethernet,
confirm the following:
a) PC Card LED glows green
b) 100 LED glows green if there is a 100Mb connection
To Next Page
Loading...
Need help?
General