10
Laser radiation!
Do not stare into the beam!
Class 2 laser · < 1 mW · 635 nm
EN 60825-1:2014/AC:2017
Function / Application
The automatic cross-line laser for aligning tiles,
wall studding, windows, doors etc.
– The slope-mode feature is an extra that permits gradients
to be laid out.
– RX-ready: integrated hand-held receiver mode
–
Digital Connection interface for remote control of the device
– Automatic levelling range 4°, Accuracy 0,35 mm / m
General safety instructions
– The device must only be used in accordance with its
intendedpurpose and within the scope of the specications.
– The measuring tools and accessories are not toys.
Keep out of reach of children.
– Modications or changes to the device are not permitted,
this will otherwise invalidate the approval and safety
specications.
– Do not expose the device to mechanical stress, extreme
temperatures, moisture or signicant vibration.
– The device must no longer be used if one or more of its
functions fail or the battery charge is weak.
– Please ensure compliance with the safety regulations set out
by local and national authorities with regard to the correct
and proper use of the device.
Safety instructions
Using class 2 lasers
Completely read through the operating instructions,
the "Warranty and Additional Information" booklet
as well as the latest information under the internet
link at the end of these instructions. Follow the
instructions they contain. This document must be
kept in a safe place and passed on together with
the device.
!
EN
To Next Page
Loading...
Need help?
General
