8.5 Software Update
Connect card reader with TF card to PC and install drive program.
Connections
a) Insert the TF card into the card reader;
b) Connect one end of the USB cable to the card reader, and the other end to
the USB port of the computer.
Install TF Card Reader Drive Program
You don’t need to install the drive program if the operating system of your
computer is Windows Me/2000/XP, Mac OS 9.x/Mac OS X or Linux 2.4.x, but
have to install if the operating system is Windows98.
Interruption may be caused for the following reasons during the update process.
Please try again after solving the problem.
1) TF card reader is poor connected to the computer or the drive program of the
TF card is installed incorrectly;
2) Space on TF is not enough;
3) Other reasons.
Begin to Update Software
1. After you successfully copy the latest software version into TF card, unplug
the USB cable from your PC.
2. Remove the TF card from the TF card reader and insert it into the TF card
slot of CRP123.
3. Once a updated version is found, a message box prompting you to update
will pop up on the screen after CRP123 is turned on.
4. Click “OK” to start updating and a progress bar will appear. It may takes
several minitues to finish update if your upgrade package file is too large,
please wait.
8.6 Purchase Software
If users can’t nd the software they needed in download center, they should buy
the software in the purchase center or updated in the update center.
Click [Buying center], then you can tick box before the serial number to choose
the software. To uncheck it, just click it again.
Click [Order] to add the selected software to your shopping cart.
Click [Pay] to buy the software. The bought software will be automatically added
to the user’s download center. Click [Clear] to empty the shopping cart. Click
[Purchase other] to buy other software.
To Next Page
Loading...
Need help?
General
