Launch X-431 PROS MINI User Manual

LAUNCH X-431 PROS MINI User Manual
37
6 FAQ
1. Communication error with vehicle ECU?
Please confirm:
1) Whether the VCI is properly connected.
2) Whether the vehicle ignition switch is ON.
3) If all checks are normal, send vehicle year, make, model and VIN number to
us using Dia. Feedback feature.
2. Failed to enter into vehicle ECU system?
Please confirm:
1) Whether the vehicle is equipped with the system.
2) Whether the VCI is correctly connected.
3) Whether the vehicle ignition switch is ON.
4) If all checks are normal, send vehicle year, make, model and VIN number to
us using Diagnostic Feedback feature.
3. How to save power?
 Please turn off the screen while the tablet keeps idle.
 Set a shorter standby time.
 Decrease the brightness of the screen.
 If WLAN connection is not required, please turn it off.
 Disable GPS function if GPS service is not in use.
4. How to reset the tablet?
Resetting may cause data loss. Before doing so, please make sure important data
and information has been backed up.
Do the following to reset the tablet:
1. Tap “Settings” --> “Back & Reset”.
2. Tap “Factory data reset”.
3. Tap “Reset tablet”.

Launch X-431 PROS MINI Specifications

General

Brand	Launch
Model	X-431 PROS MINI
Category	Diagnostic Equipment
Language	English