Launch X431 Scopebox User Manual

LAUNCH X431 PAD Scopebox User’s Manual
Options descriptions:
Time/DIV: click << or >> to adjust;
Y-T Format: click << or >> to adjust. It includes 3 options: Normal, Scan and
Scroll (from ri
ght to left).
Vertical Settings
User can make some settings directly by clicking << or >> next to options.
Alternatively
, Click
located in the upper right corner of the vertical settings
to make more settings. See Fig. 3-4.
Fig. 3-4
Options descriptions:
A. Channel selection;
B. Channel switch selection;
C. Channel voltage adjustment;
D. Channel coupling modes sele
ction: DC,
AC or Ground;
E. Channel probe selection;
F. Bandwidth limit switch;
G. Channel reverse phase switch.
3.3.2 Trigger setting
Trigger indicates that when certain waveform meets the conditions that are
predefined according to the requirements, the oscilloscope captures the
waveform and its adjacent section, and then presents it on the screen.
<1> Trigger mode
It is classified into 3 categories: Pulse Width and Edge.
[Edge]: It is the most common and ef
fective trigger mode, which is widely used
9

Launch X431 Scopebox Specifications

General

Brand	Launch
Model	X431 Scopebox
Category	Test Equipment
Language	English