5
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned Off.
2. Locate the battery cover on the bottom of the unit.
3. Use a screwdriver to loosen the screw and open the battery
cover.
4. Install 4 new AA (AM-3/LR6) batteries into the battery
box as illustrated. (The use of new alkaline batteries is
recommended for maximum performance.)
5. Replace the battery cover and tighten the screw to secure.
Low Battery
When the batteries are exhausted, the Learn & Groove
®
Dancing
Panda™ may shut o or restart suddenly. Please replace the
batteries with a full set of new batteries before further use.
To Next Page
Loading...
Need help?
General