LECTRICEBIKES.COM | 602.715.0907 34
PREPARING TO RIDE
To prevent serious injury or death:
• Before each ride, inspect your eBike to ensure the front axle, the
rear axle, the handlebars, and the seat are secure.
• Check that both the handlebar latch and frame latch are fully
closed and locked.
• Check the tire pressure of both wheels.
• Pull the brake levers to make sure your brakes are working
properly and adjust them if necessary.
• Never exceed the maximum total weight limit of 275 lbs. (125
kg). The rear rack can hold a maximum of 55 lbs. (25 kg). As an
example, if you have 40 lbs. (18 kg) of cargo, then the maximum
weight of the rider would need to be 235 lbs. (107 kg).
• Only carry the cargo you need. More weight will drain the battery
faster and affect how the bike handles.
• Ensure all components are properly secured.
• Make sure your battery is fully charged.
• Properly secure your helmet.
YOUR FIRST RIDE
The acceleration of your Lectric eBike may be faster than anticipated,
and may feel unusual at rst. Before your rst ride, you should use
the lowest level of pedal assist (PAS 1) and become familiar with
the operation of your Lectric eBike by practicing starting, stopping,
cornering, and navigating obstacles in a safe environment away
from other bicycles, pedestrians, and/or vehicles. You should also
pay particular attention to terrain conditions as you may approach
obstacles faster than expected.
WARNING!
To Next Page
Loading...
Need help?
General
