If no RDS information is available, the currently tuned frequency is shown.
6 AUX mode
Aux in mode plays audio from an external source such as an MP3 player.
To play audio with Aux in mode,
1).Connect the external audio source to the Aux In (RCA) stereo socket.
2). Either press Source and select AUX in
3). Adjust the volume of MSY2 (and, if necessary, the audio source device) as required.
7. Bluetooth mode
Prior to pairing, verify your device supports Bluetooth 5.0 and your device is not
connected to any other Bluetooth product. Devices may pair differently. Below is a
general guide.
1. Press to Source and select Bluetooth mode. This will power on the Bluetooth. Turn
the volume up about ¼ to start. Also turn up the volume on the source device (the
device you are streaming from).
2. Turn on the Bluetooth on your enabled device.
3. Select Bluetooth device name “LEMEGA MSY2” when it appears on your device’s
screen to initiate searching.
4. You can start to play your music files wirelessly. Adjust the volume level on your
device.
You should not have to pair your device again.
Depending on your device, you may need to make multiple attempts at Pairing and/or
Connecting to the “LEMEGA MSY2”, but please give your device adequate time to Pair
or Connect before repeating the process.
8 My Music with USB playback
To play audio from a USB mass-storage device such as a USB Flash stick or USB hard
To Next Page
Loading...
Need help?
General
