Lennox ComfortSense 7000 series User Manual

506229−01 05/09
Page 8
Schedule ScreenProgramming
Days & Events Programming process
Action Display shows...
1 Press SCHEDULE tab SCHEDULE screen
2 Press EDIT UP/DOWN arrows on right−hand
side of screen; EDIT changes to
CANCEL
3 Press NEXT to highlight the de-
sired grouping of days
Days change to match selected
group, e.g.
MON TUE WED THU FRI
4 Press an event: WAKE (default),
LEAVE, RETURN, & SLEEP to
select for programming
Filled triangle above event
indicates which event is selected
for change
5 Press UP/DOWN arrows to
select desired temperature
After change is made, SAVE
appears in the bottom right−hand
of the screen
6 Press FAN repeatedly to select
desired fan mode
Fan indicator displays selection
(ON, AUTO, or CIRC)
7 Press UP/DOWN arrows to
adjust start time for
selected event
Information area displays start
time
8 Repeat steps 4 − 7 for all remaining events.
(If you selected other than MON TUE WED THU FRI SAT SUN), continue;
otherwise, skip to step 11.
9 Press NEXT for the next group
or the next day
Days change to match selected
group, e.g.
SAT SUN
10 Repeat steps 3 through 8 for the remaining days, if necessary.
11 Press SAVE when all events and
days are programmed as desired
The changes are made and the
schedule screen reappears.
2
4
6
1
7
5
WAKE PERIOD BEGINS
5:OOAM
9 11
3
Figure 5. Programming days and events

Lennox ComfortSense 7000 series Specifications

General

Brand	Lennox
Model	ComfortSense 7000 series
Category	Thermostat
Language	English