5
Typical System Components
Indoor Unit
Wireless Remote
Control
Filter
Outdoor Unit
009-030 shown
Utility
Bundle
Return Air
Supply Air
Wiring
Condensate drain line
(wrapped in foam insulation)
Indoor unit wiring connections
(under access plate)
208/230V Outdoor Unit
Terminal Block
To Indoor
Unit
To Power
Supply
Access cover
for valves
Refrigerant Line Set, Condensate Line
And Indoor / Outdoor Cable
(field-provided)
TAPE
IMPORTANT - The refrigerant
metering device for this system is
located in the outdoor unit. This
makes it necessary to insulate the
refrigerant lines individually to
prevent sweating.
1 2 3 L1 L2
UV-rated tape (field-provided)
Line set
(wrapped in foam insulation)
Access cover for power
and control wiring
connections
Condensate drain line
(field-provided)
Mounting Plate
Liquid and vapor shut off valves
115V Outdoor Unit
Terminal Block
To Indoor
Unit
To Power
Supply
1 2 3 L N
IMPORTANT - Condensate drain line must always
be located at the bottom of the
bundle.)
Figure 1. Typical System Shown
To Next Page
Loading...
Need help?
General
