7
Wireless Remote Functions (Continued)
°C
°F
SLEEP button
Use the SLEEP button to
initiate or cancel the sleep
function. Press SLEEP but-
ton. When sleep icon
appears, press TIMER
OFF button and use − and
+ buttons to set time for
system shutdown. When
desired time is displayed,
press TIMER OFF button
again. Press SLEEP button
to cancel sleep function.
In cooling mode, SLEEP
function increases temper-
ature (+1.8°F per hour)
over a two−hour period af-
ter the selected sleep time.
In heating mode, SLEEP
function decreases temper-
ature (−1.8°F per hour) over
a two−hour period after the
selected sleep time.
NOTE − The sleep function
is not available in AUTO or
FAN modes.
TIMER ON button
Use the TIMER ON button
to initiate or cancel a single
timed−on event. Use this
feature to bring the system
on just before you return
home or just before you
wake in the morning.
Press the TIMER ON
button once. The clock
icon disappears and a
time setting appears with
the word ON flashing at the
right. Use the − and + keys
to adjust the time setting to
the desired time for the
system to begin operation.
Press the TIMER ON
button again to accept the
setting. When successfully
set, the word ON will ap-
pear to the right of the cur-
rent time display. Press the
TIMER ON button again if
you want to cancel the
timed−on event.
REMOTE LOCK
Press − and + buttons si-
multaneously to either lock
or unlock the remote con-
trol buttons. When locked,
the icon is displayed.
SWITCH FROM °C TO °F
With system OFF, press
MODE and − buttons
simultaneously to switch
from Centigrade to
Fahrenheit. Current
selection is displayed to
the right of the temperature
display.
TIMER OFF button
Use the TIMER OFF button
to initiate or cancel a single
timed−off event. Use this
feature to turn the system
off just after you leave the
house or just after you go
to bed at night.
Use the same method
described above to set the
desired time for the system
to stop operation. When
successfully set, the word
OFF will appear to the right
of the current time display.
Press the TIMER OFF but-
ton again if you want to
cancel the timed−off event.