3
Features
Auto Restart
If the unit loses power, it will automatically restart with the
prior settings once power has been restored.
Louver Angle Memory
When turning on your unit, the louver will automatically
resume its former angle operation.
Refrigerant Leakage Detection
The indoor unit will automatically display “EC” when it
detects refrigerant leakage. For a detailed explanation of
your unit’s advanced functionality (such as TURBO mode
and its self-cleaning functions), refer to “Operation (Wireless
Remote Controller)” on page 4.
Louver Adjustment
IMPORTANT
DO NOT adjust the louvers by hand. Louvers are
adjustable only by using the furnished wireless remote
controller or optional wired controller.
Use the furnished wireless remote control or optional wired
controller to set the position of the discharge air louvers.
The louvers may be set to automatically swing between
the outward and downward positions, OR you may set the
louvers so that they are stationary in a single position. It is
always recommended to direct the ho rizontal discharge air
louvers outward while cooling.
Cooling operation
Set horizontal louvers outward
.
Auto-swing operation
Set louvers to swing up and down automatically
.
Figure 2. Louver Operation
Refer to the wireless remote control section on using the
swing and direct buttons.
Return Air Filters
area with a large amount of dust.
Cleaning Return Air Filters
necessary. Lift the front panel of the indoor unit.
1.
towards yourself.
2.
3.
only mild detergent.
Filter Tabs
Figure 3. Filter Removal and Service
4.
shake off excess water.
5.
6.
7. Close the front panel.
To Next Page
Loading...
Need help?
General
