Right
1. USB-C connector Connect to an external storage or data devices.
Note: An appropriate adapter may be needed for connecting to
external devices. This connector cannot be used to connect external
display devices.
2. Camera switch Turn the camera on or off.
3. Power button Press the button to turn on the computer or put the computer into
sleep mode.
Note: You can turn on the computer by flipping open the LCD screen
if Flip to Boot is enabled.
4. Power light
• On: The computer is turned on.
• Off: The computer is turned off or in hibernation mode.
• Blinking: The computer is in sleep mode.
4 User Guide
To Next Page
Loading...
Need help?
General