Table 8. Status indicators (continued)
Indicator Meaning
3 Drive in use
Blue: Data is being read from or written to the hard disk
drive, the solid state drive, or the optical disk drive.
When this indicator is on, do not put the computer into
standby mode or turn off the computer.
Note:
Do not move the system while the blue drive-in-use light
is on. Sudden physical shock could cause drive errors.
4 Power
Blue: The computer is on and ready to use. This indicator
stays on whenever the computer is on and is not in
standby mode.
Blinking blue:
The computer is in standby mode.
5 Battery status
Blue: The battery is charged to 95% or more of its capacity.
Blinking blue:
The battery is being trickle-charged.
Orange:
The battery is being normally charged.
Off: The computer is operating on battery power, and the
battery has enough power.
Blinking orange:
The computer is operating on battery power, and the
battery is charged to no more than 8% of capacity.
6 Wireless status
IdeaPad S9e and S10e:
Purple: The wireless LAN and the Bluetooth features are on, and
the radio link is ready for use.
Orange:
The Bluetooth feature is on, and the radio link is ready
for use.
Blue: The wireless LAN feature is on, and the radio link is
ready for use.
Blinking blue:
The wireless LAN feature is on, and the networks are
being scanned.
IdeaPad S10:
Blue: Any one of the wireless features — wireless LAN,
wireless WAN, and Bluetooth — is on, and the radio link
is ready for use.
Blinking blue:
Any one of the wireless features is on, and the networks
are being scanned.
48 IdeaPad S9e, S10e, and S10 Hardware Maintenance Manual
To Next Page
Loading...
Need help?
General